The AS50e rammer uses a lithium-ion battery system for emissions-free operation. It weighs 154.5 pounds and hits at a rate of 680 bpm. The guide handle reduces hand-arm vibration...
Wacker Neuson has expanded its rammer line with the addition of the BS70-4As, which is powered by a 3.6-horsepower, multi-position, four-cycle Honda GXR120 engine. The BS70-4As...
MS595 and MS695 tampers can be utilized in trenches, building sites, and road construction.A new six-inch foot size version of the MS595 joins the traditional 9- and 11-inch models...
At 6 inches wide, the LT5005 rammer is 3 inches smaller than its predecessor and the LT6005 is 9 inches wide, 2 inches shorter than the previous model.These designs enable operators...
Wacker has expanded its vibratory rammer line to include two models powered by a 4-cycle Honda engine.The BS 50-4As and BS 60-4As are equipped with a 3.2-horsepower GX 100 Honda...
The BS 50-4s four-cycle rammer features a Wacker Neuson WM 100 engine, delivering a 10 percent increase in power. It hits at 660 blows per minute and has an amplitude (stroke)...
New engine in the BS 60-4s, 4-cycle ram-type tamper has 10 percent more power and is designed by Wacker Neuson to withstand rugged rammer applications, the company says. WM 100...
Sakai’s high impact, low vibration tamper/rammers – the RS45 at 110 pounds, RS65 at 160 pounds and RS75 at 180 pounds – are powered by Honda gasoline engines ranging in horsepower...
