Liebherr adds LTR 1150 telescopic crawler crane
The 150-tonne LTR 1150 Liebherr crawler crane expands the company’s range and is positioned between the LTR 1100 and the LTR 1220. It has about 50% more lifting capacity than the LTR 1100.
It can be transported complete with crawler carriers at a total weight of 60 tonnes and a transport width of 3.5 m. The two crawler carriers, each weighing 11 tonnes, can be transported together on a standard semi- trailer with a width of 2.55 m. The integrated access steps are folded in during transport.
The telescoping crane has the Liebherr VarioBase, which enables the crane control to determine the optimum load capacity depending on the track width and angle of rotation. VarioBase allows significantly higher load capacities, especially for lifts directly over the supports.
The LTR 1150 is equipped with load charts for slopes up to a maximum of 4 degrees—in gradations of 0.3, 0.7, 1.5, 2.5, and 4 degrees. “WindSpeed Load Charts” make it possible to work safely and flexibly even at higher permissible wind speeds of up to 15.6 mps.
Read also: CCO and NCCO foundation enter OSHA alliance
The telescoping crane has the Liebherr VarioBase, which enables the crane control to determine the optimum load capacity depending on the track width and angle of rotation. VarioBase allows significantly higher load capacities, especially for lifts directly over the supports.
The LTR 1150 is equipped with load charts for slopes up to a maximum of 4 degrees—in gradations of 0.3, 0.7, 1.5, 2.5, and 4 degrees. “WindSpeed Load Charts” make it possible to work safely and flexibly even at higher permissible wind speeds of up to 15.6 mps.
