Offered for Volvo wheel loaders between L60 to L350, and for Volvo excavators from 14 to 95, the system has a low-profile design meant to have greater penetration capability and higher bucket fills. The locking system has a reusable locking pin and an auto-tightening effect once fitted; the reusable pin locks into place by twisting it a quarter turn.
There are five types of teeth available for the excavators: general purpose, abrasive material and rock, pick point, twin pick, and spade nose. There are two adaptor types offered, and also an optional mechanical wear cap available, which fits on the standard adaptor and extends tooth life further. For wheel loaders there are three types of teeth available: general purpose, abrasive material and rock, along with three types of adaptors.